1. Introduction

Silicone leather, as a new type of eco-friendly compound, finished leather In recent years, materials have attracted attention for their excellent weather resistance, stain resistance, flame retardancy, and environmental properties. Compared to traditional polyvinyl chloride (PVC) leather and polyurethane (PU) leather, silicone leather offers significant advantages in multiple performance dimensions and is widely used in automotive interiors, home furnishings, outdoor products, medical fields, and other fields. However, as a material still in the development and introduction stage, silicone leather faces numerous technical challenges and quality issues during production and later application. This article will systematically analyze the common problems of silicone leather and their causes from two dimensions: production and later application.

2. Main issues in the production process

1. Surface “orange peel” phenomenon

“Orange peel” is one of the most common surface defects in silicone leather production, referring to the uneven texture on the leather surface resembling orange peel, which seriously affects the product’s appearance and surface performance.

Cause analysis:

Raw material factors : Uneven particle size distribution of raw materials such as silicone resin, pigments, and fillers, or poor compatibility between pigments and resins, can lead to uneven coatings during the coating process

Coating process : Uneven coating, excessive coating amount, improper coating speed or pressure parameters cause uneven shrinkage during curing

Curing conditions : Too high or too low curing temperature, insufficient curing time, resulting in incomplete curing or uneven shrinkage of the coating

Environmental factors : Excessive humidity and poor air circulation in the production environment affect solvent evaporation and curing performance in the coating

Solution direction : Optimize raw material ratios, improve coating process parameters, precisely control curing conditions, and enhance the production environment.

2. Poor interlayer adhesion and delamination

Silicone materials have low surface energy and inherent inertness, making bonding with polyurethane foam layers or base fabric materials inherently difficult.

Cause analysis:

Surface tension differences : The surface tension difference between the silicone layer and the polyurethane layer is significant, making it difficult for traditional physical splicing methods to achieve a strong bond, and interfacial stress easily leads to delamination

Insufficient chemical bonding : If only adhesives are used for physical bonding rather than achieving molecular-level chemical crosslinking, it is difficult to ensure interlayer bond strength

The effect of the tackifier is poor : Some tackifiers cannot form effective chemical or physical winding with the silicone layer and substrate simultaneously

Industry progress : Currently, there are technologies that use the “fluorosilicon synergy” strategy, using the silicone backbone of the tackifier to physically entangle the surface polymer, while the fluorine-containing side chains interact strongly with the hydroxyl groups of the substrate, significantly improving interlayer bonding strength.

3. Insufficient wear resistance and the texture of oil peeling

Some silicone leathers are coated with a layer of tactile oil (linear silicone oil + matte powder) to improve sticky feel, but these products generally suffer from poor wear resistance.

Cause analysis:

Cross-linked structural defects : Insufficient cross-linking points in linear silicone oil form a similar two-dimensional structure, making it impossible to form a dense overall surface network

Packing compatibility issues : Matte powder has poor compatibility with linear silicone and easily peels off the surface during use

Loose structure : Linear silicone oil is merely a cross-linking of points and lines, with a surface structure that is not dense enough and inherently inadequate wear resistance

Consequences : After 2000-5000 wear-resistance tests by Whiskers, surface texture damage appears; After 1-2 months of actual use, the tactile oil layer wears away, exposing the underlying silicone, causing surface stickiness and dust absorption.

4. Cost control and pricing issues

Currently, the price of silicone leather is about ten times that of PVC leather and five times that of PU leather, putting significant cost pressure.

Cause analysis:

Raw material costs are high : Silicone resin itself is priced much higher than polyurethane and polyvinyl chloride

The process is complex : Metal catalytic reaction systems have high environmental requirements, require dedicated production lines, and have long production cycles

The technical threshold is high : There are few material manufacturers with mature technology, and large-scale effects have yet to be formed

A compromise solution for semi-silicone leather : To balance costs, some manufacturers have developed “semi-silicone leather” (polyurethane foam layer + silicone surface layer), but this increases the technical difficulty of interlayer bonding

5. Color control and batch stability

Silicone leather uses a reactive liquid system, presenting unique challenges in color control.

Cause analysis:

No way to retouch or change the appearance : The inertness of silicone materials makes it impossible to perform color correction and color alteration processes after curing

Color switching is complex : Reactive liquid systems make the color switching process cumbersome and limit color selection

Batch stability requirements are high : Extremely high standards for color stability control during production and between batches, making it unsuitable for small-batch processing

3. Main issues in later application

1. Poor adaptability of sewing processes

Silicone leather exhibits behavioral characteristics different from traditional leather during sewing and processing.

Cause analysis:

Dense structure 😛 U leather and PVC leather have internal foaming voids, whereas silicone leather does not foam during synthetic reactions and has a tight structure

Pinhole issues : Relatively low mechanical properties, large needle holes during sewing, affecting appearance

High resistance to puncture : In ordinary suturing techniques, needle puncture is more labor-intensive, and the process involved in suturing needs to be optimized and adjusted

2. Elongation and elasticity limits

Silicone leather has limited elongation and elasticity, making it unsuitable for products with excessively high tensile performance requirements.

Cause analysis:

Cross-linked network structure : The cross-linked network structure of silicone determines its elastic modulus and elongation at break within a specific range

No foaming structure : Lacking a foam layer design, it is impossible to provide additional deformation capacity through microporous structures

3. Market chaos and quality risks of “fake silicone skin.”

There is a large number of inferior “fake silicone skins” on the market, seriously damaging the reputation of silicone leather applications.

Main Types and Issues:

Silicone leather with a tactile oil coating on the surface : Applying tactile oil only to the silicone surface improves stickiness, but it is not wear-resistant, and performance drops sharply after short-term use

PU silicone oil is a counterfeit product : Applying a layer of silicone tactile oil to the surface of traditional PU leather not only causes the oil layer to peel off easily, but the underlying PU is not resistant to hydrolysis and salt spray corrosion, allowing water molecules to pass through the tactile oil layer, causing the PU layer to degrade and detach

4. Performance issues in special environments

Although silicone leather generally outperforms PU and PVC in weather resistance, it still poses challenges in certain environments.

Insufficient moisture permeability Although silicone has some breathability, its moisture permeability in actual use is still insufficient, making it difficult to effectively pass through human moisture or sweat. Some technologies improve moisture permeability by adding hydrophilic components such as polyether, but may increase process complexity.

Dust adsorption issues : Some silicone leather surfaces easily absorb dust, hair, lint, etc., affecting cleaning performance.

4. Root causes and optimization directions

1. Technical Roots

Question categories	The root cause
Surface defects	Insufficient precision in raw material compatibility and process parameter control
Low bonding strength	Silicone has low surface energy characteristics and is difficult to bond with heterogeneous materials
Poor wear resistance	Insufficient surface cross-linking density and structural defects in tactile oil
High costs	Raw material prices, process complexity, and insufficient scaling

2. Optimize development direction

Basic theoretical research : Strengthen basic research on the relationship between silicone molecular structure and performance, and promote technological maturity

Interface bonding technology : Develop new bonding strategies such as chemical bonding and molecular-level winding to solve interlayer bonding challenges

Improved wear resistance : Optimize surface cross-linking structures, developing a technical route that does not require tactile oil or integrates tactile oil with the substrate

Cost reduction : Develop compromise solutions such as semi-silicone leather to optimize production processes and improve production efficiency

Post-processing technology support : Process upgrades and optimizations are carried out for post-processing steps such as stitching and embossing

5. Conclusion

Silicone leather, as a new generation of eco-friendly fabric, finished leather The material has significant advantages in performance, but it still faces many challenges in production and application. From surface defects, interlayer adhesion, and abrasion resistance issues in production, to later application of sewing processes and elongation limitations, and the market-level chaos of “fake silicone leather,” these issues together form a key bottleneck in the development of the silicone leather industry. With deepening basic research, optimization of process technology, and improvement of the industry chain, silicone leather is expected to gradually overcome existing problems and deliver greater value in high-end application fields.